A network that stays stable at peak load
We design networks around the real load and risk profile of the site: correct segmentation, sufficient bandwidth, seamless Wi-Fi coverage and control over who can reach what.
- Switching and routing
- Enterprise Wi-Fi coverage
- VLAN segmentation and access policy
- Monitoring and fault response
The network as a business-critical service
On a modern site the network carries far more than internet access: cameras, access controllers, telephony, point-of-sale terminals, medical equipment and smart systems all share the same infrastructure. So network planning starts with one question — what traffic will run across it, and what happens if it stops.
We build a segmented network where systems are logically separated. Camera traffic does not interfere with office work, guest Wi-Fi cannot reach internal resources, and critical services get priority.
Wi-Fi coverage is planned on measurements: how many devices will operate where, what walls stand in the way, and how a user moves from one area to the next without dropping.
Segmentation from day one
Separate networks for office, security, guests and technical systems.
Predictable Wi-Fi
Coverage is planned on the floor plan and verified by on-site measurement.
Visibility
Monitoring shows load, outages and problem nodes in real time.
What does not work in typical networks
These are the faults we encounter most often:
A flat network
Every device sits in one segment — from a camera to a guest’s phone. One problem affects the whole site.
Wi-Fi blind spots
Access points were installed where a socket happened to be, not where coverage is needed. Signal is excessive in one place and absent in another.
Uncontrolled access
Everyone knows the password, guests can see internal resources, and former employees still have working credentials.
No redundancy
One internet link and one switch — either failing brings the site to a stop.
Our solution
Network architecture
Separation of core, distribution and access layers, bandwidth calculation and redundancy for critical nodes.
Segmentation and policy
VLANs per system, traffic filtering between segments, an isolated guest network and priority for critical services.
Enterprise Wi-Fi
Access points positioned to plan, unified management, seamless roaming between zones and a separate guest network.
Monitoring and support
Node health checks, outage alerts, configuration backups and scheduled updates.
Scope of work
Design
- Load and requirements analysis
- Logical and physical topology
- Wi-Fi coverage plan
- IP addressing scheme
- Security policies
Implementation
- Switch installation and configuration
- Routing and internet links
- Access point placement
- VLAN and QoS settings
- VPN for remote access
Operations
- Monitoring setup
- Alert configuration
- Configuration backups
- Firmware and software updates
- Periodic audit
Outcome
Stable operation
Systems stop competing with each other, even under peak load.
A security baseline
Segmentation limits the spread of a problem and reduces the risk of unauthorised access.
Continuous connectivity
A secondary link and duplicated nodes keep the site running.
Simpler administration
A single management interface and clear documentation lower day-to-day effort.
Technologies
We work with platforms that offer long-term support and open standards.
Switching and routing
- L2/L3 managed switches
- PoE and PoE+ power
- Link aggregation
- Stacking
Wireless
- Wi-Fi 5 / Wi-Fi 6
- Centralised controllers
- Fast roaming
- Guest portal
Security and management
- Firewall and UTM
- VPN (site-to-site and remote)
- RADIUS authentication
- SNMP monitoring
Where it applies
What people ask us most often
How do you plan Wi-Fi coverage?
Are managed switches really necessary?
Can a backup internet link be configured?
How is the guest network kept separate?
Related services
Let’s talk about the building first — the hardware comes after
Tell us about the site: floor area, purpose, existing systems and timeline. We will prepare solution options and a transparent specification.
+995 597 43 97 97
- Initial consultation at no cost
- Site survey at a time that suits you
- Specification with alternatives and open pricing