Skip to main content
KMS
Auto service hall with cars in the service bays

Large auto service center

Complete video surveillance system for an auto service center

Planning, cabling, installation and monitoring setup for a 32-camera IP video surveillance system.

Project scale

Dahua IP cameras
32
dedicated UTP Cat5e runs
32
camera power
PoE
monitoring workstation
1

About the project

KMS planned and fully delivered a video surveillance system for a large auto service center. 32 Dahua IP cameras cover the indoor areas and the outdoor perimeter.

Each camera has its own UTP Cat5e cable and is powered over PoE. KMS installed and configured PoE switches, built a dedicated recording computer, installed the surveillance software and set up a monitoring workstation.

Work delivered

  • 01 — System planning

    • Camera positions defined
    • Indoor and outdoor coverage planned
    • Cable routes planned
  • 02 — Cabling

    • A dedicated cable to each of 32 cameras
    • UTP Cat5e cable
    • Runs indoors and outdoors
  • 03 — IP camera installation

    • 32 Dahua IP cameras
    • Indoor areas and outdoor perimeter
    • PoE power
  • 04 — Network equipment

    • PoE switches installed
    • Network devices configured
    • Cameras connected to the network
  • 05 — Recording system

    • Computer with NVR function built
    • Placed in a separate room
    • Surveillance software installed and configured
    • Camera management and playback set up
  • 06 — Monitoring workstation

    • Monitor installed
    • Connected to the system
    • Camera views displayed
  • 07 — Testing and handover

    • System and images verified
    • Working system handed over

System schema

  1. 32 IP cameras

    • Dahua
    • Indoor and outdoor
    UTP Cat5e · PoE
  2. PoE switches

    • Power and network
    LAN
  3. Recording computer

    • NVR function
    • Surveillance software
    Video
  4. Monitoring

    • Dedicated monitor
Conceptual diagram — not an exact network topology.

Technical data

Site type
Large auto service center
Cameras
32 IP cameras
Camera brand
Dahua
Coverage
Indoor areas and outdoor perimeter
Network cable
UTP Cat5e
Camera power
PoE
Network equipment
PoE switches
Recording
Purpose-built computer (NVR function)
Surveillance software
Installed and configured
Monitoring
Dedicated monitor
Completion
Final system handover

Result

The auto service center received one video surveillance system: 32 IP cameras, indoor and perimeter coverage, centralized recording and a monitoring workstation.

KMS delivered the full cycle — from planning and cabling to installation, software setup and final handover.